COAD
HIGH SPEED AUTO DOOR
COAD develops diverse models
of high speed industrial door(シート製高速シャッター)
to be fitted in any industry.
So, customers just choose any series for their company.
C-1
This industry chooses C-1 which is basic series
of high speed automatic door(ประตูความเร็วสูง).
C-1 is strength from wind because it has wind-bar and wind-lock system
to prevent the separation of each sheet.
Therefore, this model could be installed at windy condition.
Moreover, customers could exchange the sheet by their preference.
So, customers save repair cost as they want to change one of sheet.
Make your own high speed auto door(Cửa cuốn nhanh) by your preference.
C-2
If you have a plan to install the high speed rapid door
(Pintu Berkelajuan Tinggi) in narrow aisle or huge entrance,
COAD suggests C-2 which is slim model
of high speed automatic door(high speed industrial pintu).
The motor is placed inside the drum cover
so customers do not need the extra space for motor.
It save the space and maintains the working condition being sanitary.
C-2 also has wind-bar and wind-lock system like C-1.
In this industry, they apply the pull switch
to open the high speed industrial door(Cua dong mo nhanh).
Select any sensor depending on the working condition.
C-3
In the factory under the heavy traffic by vehicle and forklift,
C-3 high speed auto door(シート製高速シャッター) is suitable.
The rail is zipper type
to restore the high speed industrial door(ประตูอัตโนมัติความเร็วสูง).
Even if the vehicle collides the high speed automatic door(Pintu Berkelajuan Tinggi),
C-3 could replace the high speed rapid door
(Cua cuon toc do cao) as original condition by itself.
Moreover, the sheet is flexible material to protect the vehicle and person.
COAD already tested more than 5,000 times for self-recovery system.
This model is normally installed with loop sensor
which detects the vehicle
as it passes on the loop line embedded in the ground.
COAD Co., Ltd
No comments:
Post a Comment